Riverside Workflow — A Step-by-Step Tutorial
Record a podcast interview with a remote guest in studio quality, edit by deleting text, and auto-generate social clips — all in one platform.
Riverside Workflow — A Step-by-Step Tutorial
Riverside records each participant locally — meaning your guest’s audio never passes through Zoom’s compression or a spotty Wi-Fi connection. This tutorial walks you through setting up a recording session, inviting a guest, recording separate tracks, editing by deleting text, and exporting auto-generated clips for social media.
Step 1: Set Up Your Studio
- Go to riverside.fm and sign in
- Click New Studio → name your show
- Configure studio settings:
- Audio sample rate: 48kHz (broadcast standard)
- Video resolution: 720p (Standard plan) or 4K (Pro plan)
- Separate audio tracks: Enabled (this is the whole point — leave it on)
- Click Enter Studio
- Allow microphone and camera access when prompted
- Select your microphone (use a USB mic like the Blue Yeti or Shure MV7 — not your laptop’s built-in mic)
- Select your camera (1080p webcam minimum, 4K if you have it)
- Do a 10-second test recording and play it back — you should hear crisp, clean audio with no echo
Pro tip: Wear wired headphones (not Bluetooth). Bluetooth headphones introduce latency and can cause echo in the recording. Earbuds with a 3.5mm cable work perfectly.
Step 2: Invite Your Guest
- In the studio, click Invite (top right)
- Copy the invite link
- Send it to your guest via email, Slack, or text
- Your guest clicks the link — they don’t need a Riverside account
- They’ll see a browser-based setup page: select mic, select camera, test audio
- When ready, they click Join Studio
Riverside guides guests through a self-check: mic test, camera test, lighting check. The platform shows warnings if the guest’s internet is unstable or their mic is too quiet.
Pro tip: Send your guest the invite link 24 hours before recording. Ask them to do the setup check then, so you’re not troubleshooting tech issues during your scheduled recording time. Include a note: “Use Chrome or Edge on a laptop (not phone) for best quality. Wear wired headphones.”
Step 3: Record the Interview
- When both you and your guest are in the studio, do a final check:
- Both mics showing green levels when speaking
- Both cameras framing faces properly (eyes at the top third of the frame)
- Headphones on, no echo
- Click the red Record button (top center)
- A 3-second countdown plays, then recording starts
- Conduct your interview as normal — talk, laugh, pause, think. Riverside records everything locally.
- When finished, click Stop Recording
- Click Leave Studio → Riverside starts uploading both tracks in the background
What happens behind the scenes: Riverside records your audio and video locally on your computer, and your guest’s audio and video locally on their computer. The files upload to Riverside’s servers in the background after you stop recording. If your guest’s internet drops mid-interview, the recording continues — the local file captures everything and uploads when the connection returns.
Pro tip: Don’t stop and restart recording if someone stumbles. Just pause, acknowledge the mistake verbally (“let me redo that”), and continue. You’ll edit out mistakes in post-production. Stopping and restarting creates separate recording files that are harder to manage.
Step 4: Wait for Processing and Review Tracks
- After leaving the studio, go to your Riverside dashboard
- Click the recording session to open it
- Riverside processes the upload (1-5 minutes for a 30-minute recording)
- When ready, you’ll see:
- Separate audio tracks for each participant (toggle solo/mute per person)
- Separate video tracks for each participant
- Auto-generated transcript with speaker labels
- Play back the recording — notice the quality difference vs. Zoom. No compression artifacts, no audio dropouts.
Pro tip: Download the raw separate tracks immediately (click Download → Audio → Separate Tracks). Keep a local backup. Cloud platforms change, accounts get locked, and having your master recordings locally is non-negotiable.
Step 5: Edit by Deleting Text
Riverside’s text-based editor is the fastest way to polish a podcast:
- In the recording view, click Edit (or Transcript tab)
- You’ll see the full transcript with timestamps and speaker labels
- To remove a section, select the text and press Delete (or Backspace)
- The corresponding audio and video is automatically removed from the timeline
- To remove filler words, click Magic Audio → Remove Fillers — Riverside deletes all “um”, “uh”, “you know” automatically
- To remove silence, click Magic Audio → Remove Silence — gaps over 1.5 seconds are trimmed
For video editing:
- Switch to Video mode in the editor
- Choose layout: Side-by-side (both speakers), Speaker view (auto-switches to whoever is talking), or Picture-in-picture
- Add lower-thirds: click a clip segment → Add Caption → type the speaker’s name
- Add transitions between segments: click between two clips → pick a transition
Pro tip: Edit the transcript first (removing mistakes, filler words, dead air), then switch to video mode to set layouts and add captions. Text-first editing is 5x faster than timeline editing. A 45-minute interview can be polished in 20 minutes.
Step 6: Generate Magic Clips for Social Media
- In the recording view, click Magic Clips (or Create Clips)
- Riverside’s AI analyzes the transcript and audio for engaging moments
- It generates 5-15 short clips (15-60 seconds each) with vertical cropping and auto-captions
- Review each clip — click to preview
- For clips you want to keep:
- Adjust the start/end points by dragging the timeline handles
- Choose caption style (bold, minimal, or karaoke)
- Add your logo (upload in Settings → Branding)
- Click Export on each clip — downloads as MP4 (1080×1920 vertical)
Pro tip: Magic Clips are good but not great at identifying the most viral moments. Treat them as candidates, not final picks. Watch each one and ask: “Would I stop scrolling for this?” If the answer is no, skip it. Quality over quantity — 3 strong clips beat 10 mediocre ones.
Step 7: Export the Final Episode
- In the editor, click Export
- Choose your output:
- Audio only (MP3/WAV): For podcast distribution (Spotify, Apple Podcasts)
- Video (MP4): For YouTube podcast channel
- Both: Export audio first, then video
- Select quality: 48kHz audio, 1080p or 4K video
- Click Export — processing takes 5-15 minutes for a 45-minute episode
- Download the final file
For podcast hosting, upload the MP3 to your hosting platform (Buzzsprout, Transistor, or Anchor). For YouTube, upload the MP4 with a custom thumbnail.
Pro tip: Export a WAV version alongside the MP3. WAV is uncompressed — keep it as your master archive. If you ever need to re-encode (for a different platform, different quality), start from the WAV, not the MP3. Re-encoding from MP3 compounds compression artifacts.
Recap
You set up a studio-quality recording session, invited a guest with a simple link, recorded separate local tracks that survived any internet hiccups, edited by deleting text from a transcript, auto-removed filler words and silence, generated social clips with AI, and exported both audio and video masters. The entire workflow — from invite to final export — took about 60 minutes for a 45-minute interview. Compare that to the traditional Zoom + Adobe Audition + Premiere pipeline, which takes 3-4 hours for the same result.